K. R. S. Industries

K.R.S Concrete Mini Mixer Machine Coimbatore 

K.R.S Construction Lift In Coimbatore 


Offering you a complete choice of products which include concrete mixer machine, concrete mixer stand type, concrete mixer wheel type, hydraulic concrete mixer machine, hand feed concrete mixer and cement concrete mixer machine.

K.R.S TMT Bar Bending Machine Suppliers In Coimbatore 

K.R.S Cement Mixer Machine 

K.R.S ladder Type Concrete Mixer Machine

K.R.S Hopper Type Cement Mixer Machine 

K.R.S Construction Trolley In Coimbatore

K.R.S TMT Bar Cutting Machine

Steel Bar TMT Bar Cutting Machine Maximum Cutting Diameter 6 to 36mm, 5HP Three Phase motor and all standard accessories.

Machine Details:-

Flat Steel                         :- 70 x 15 mm

Motor Power                  :- 5HP 2880rpm

Cutting Speed                 :- 48 T/M

Gear Box Oil Volume    :- 8Ltr,

Machine Size(LxWxH)  :- 1100x500x600mm

Weight                            :- 500Kg

KRS Portable Needle Vibrator

construction site an important tool, you can use a small gasoline engine or electric motor driven vibrator is not available
on-site construction of concrete the lack of an ideal tool.

Concrete Vibrator Features and Functions:

1. The electric concrete vibrator is a power tool that compacts the poured concrete by vibration.
2. Safe operation of electric concrete vibrator
2.1 electric plug-in vibrator
(1) On the motor power supply of the plug-in vibrator, the leakage protection device should be installed, and the grounding or zeroing should be safe and reliable.
(2) The operator should be educated in electricity, and wear insulated rubber shoes and insulated gloves when working.
(3) The cable line should meet the length required for operation. The cable line must not be piled up or the vehicle can be squeezed. It is strictly forbidden to use the cable to pull or hang the vibrator.
(4) Before use, check each part and confirm that the connection is firm and the direction of rotation is correct.
(5) The vibrator shall not be subjected to vibration testing on the initially concrete, floor, scaffolding and dry hard ground. When the maintenance work is interrupted, the power should be disconnected.

(6) During operation, the bending radius of the vibrating rod hose shall not be less than 500mm, not more than two bends. The vibrating rod shall be vertically lowered into the concrete during operation, and shall not be hard-inserted, inclined or pushed to the rod. The head must not be fully inserted into the concrete. The insertion depth should not exceed 3/4 of the length of the rod. It is not suitable to touch the steel bars, core tubes and embedded parts.
(7) The vibrating rod hose shall not be broken. When the hose is used for too long and the length is increased, it shall be repaired or replaced in time.
(8) When the machine needs to move the vibrator, turn off the motor and then cut off the power. Do not pull the motor with a hose.

(9) After the operation is completed, the motor, hose and vibrating rod should be cleaned up, and maintenance work should be carried out according to the specified requirements. When the vibrator is stored, the hose should not be piled up, it should be placed straight, and the motor should be protected against moisture.

K.R.S Concrete Screed Vibrator

K.R.S. Concrete Block Making Machine 

K.R.S Vibratory Rammer